Pioneer X-NM1 Mode D'emploi page 31

Using the timer
• If the record timer has been set, see Activating/
deactivating the timers on page 33 for limitations with
using the timers concurrently.
• After setting the timer, playback starts according to
the most recent changes to the CD play mode or the tape
direction.
• Repeat and random playback can't be used with the
wake up timer.
• If the AC power is cut (blackout, accidentally
unplugging the power cord), the system will return to
the 12:00 clock display and both the timer and clock will
have to be set again for the timer to work.
• The timer won't work if the clock isn't set!
Using the sleep timer
The sleep timer switches the system into standby after a
specified amount of time so that you can fall asleep
without worrying about the stereo being left on all night.
If you've also set the wake up timer this is important,
since the wake up timer will only work if the system is in
standby.
• During playback or recording, press
TIMER (SLEEP/TIMER) repeatedly to cycle
through the sleep timer options.
All manuals and user guides at all-guides.com
SLEEP TIMER ?
SLEEP TIMER AUTO
SLEEP TIMER 9O
SLEEP TIMER 6O
SLEEP TIMER 3O
SLEEP TIMER OFF
WAKE UP / REC
TIMER SET UP ?
While the sleep timer is in operation, press
( / ) to see the remaining time until the
SLEEP TIMER
system shuts off.
To cancel the sleep timer, switch the system into standby,
or select (as described above).
SLEEP OFF
• If you are recording a radio broadcast to the tape
recorder, the option can be selected.
SLEEP AUTO
• The option is not available if you're
SLEEP AUTO
playing a CD in repeat mode. When
tape reverse mode, playback stops after 2 sides.
• The sleep timer won't work if the clock isn't set.
8
* confirmation display
only
Switch off after the
source (CD or tape)
has played out
Switch off after 90
minutes
Switch off after 60
minutes
Switch off after 30
minutes
Cancels the sleep
timer
Wake up and record
timers (see pages 30
and 32 for more)
TIMER
is set for the
31
En