Trafimet SACIT Pantera Manuel D'utilisation Et D'entretien page 5

DECLARATION OF CONFORMITY
http://shop.trafimet.com/it/Dcue-TrafimetGroup-Adf3.html
Trafimet Group Spa, a duly registered Italian Manufacturing Company, located in Via del
Lavoro, 8 36020 Castegnero (VI), hereby declares that products identified and described
on these pages are in conformity with the Regulation: EU 2016/425 and the standards
EN 175:1997, EN 379:2009, CSA Z94.3, ANSIZ87.1, EN 12941: 1998 +A1:2003+A2:2008
TH3 R SL
WARNINGS
Please read carefully the user and
maintenance manual before operating.
Taking into use and all maintenance
work must be implemented and carried
out by qualified personnel only. The
expression ‹qualified personnel› refers
to operators working in compliance
with the above-mentioned provisions
and standards; said operators must
recognize and properly evaluate
possible risks/dangers related to the
use of welding torches.
Dispose of this product responsibly
after use. All used parts and equipment
must be properly recycled according
to the local requirements/ regulations.
SAFETY PRECAUTIONS
Fumes are hazardous for health.
Operate under a hood or in ventilated
areas only.
Do not immerse the auto-darkening
filter in water. Do not expose the filter
to liquids and protect it from dirt.
Do not modify or implement structural
changes to the helmet.
Keep the torch turned away from
yourself and others.
If the welding filter doesn't darken
when the arc is ignited, stop welding
immediately and contact your
supervisor or your dealer.
BEFORE WELDING
Make sure to remove any additional
protection foil from both sides of the
protection lens.
USE
Never place the helmet or the filter on
hot surface.
Use only within the temperature range
of -10°C (14°F) – +60°C (140°F)
MAINTENANCE
Regularly replace the cracked/
scratched protection cover lens.
Pack contents
PANTERA Autodarkening mask (see fig. 1)
CODE DESCRIPTION
LVE000238 Outside protection plate
LVE000237 Inside protection plate
VCE000010 Ergonomic headgear
LCD Filter included (see fig. 2)
1. Battery cover (2 pcs)
2. Battery (2 pcs)
3. Display
4. WELD/GRING button
5. SENSITIVITY button
6. LCD display
7. SHADE button
8. DELAY button
114x133x1 mm 5
106x66x1 mm 5
1
5