4.
LCD and Operation
4.1
LCD display screen
There is a LCD display screen on Pantera Air System to show the working system condition.
2.
3.
Any of them will flash if there are any disfunctions on Pantera Air System.
4.2
Operation
Switch the device on by pressing the ON button once.
x1
Press the ON button once again, the air flow is at level 1 (~170L/min).
x2
Press the ON button once again, the air flow is at level 2 (~200L/min).
x3
Press the ON button once again, the air flow is at level 3 (~230L/min).
Press the ON button once again, the air flow reverts to level 1 (~170L/min).
x4
1.
The system will turn off the turbo unit if long press the OFF button more than 3 seconds.
2.
The system will shut down the entire circuit and switch to sleep mode if not used for more
than 30 minutes. Pressing the ON button can activate the system.
3.
The system must be operated in the temperature range of -5°C to +55°C and relative
humidity less than 90%RH.
Part 1 shows the data of current air flow.
Part 2 shows the level of the airflow.
Part 3 shows the filter condition.
4.
5.
Part 4 shows the battery.
Part 5 shows the temperature of the battery.
1.
13