Tivoli Audio Music System Two+ Mode D'emploi page 12

Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is not connected
to any other Bluetooth product. Devices may pair differently. Below is a general guide.
1. Press the Music System Two+'s front panel power button followed by the Bluetooth button,
or change the source to Bluetooth. This will power on the Bluetooth. Turn the volume up about
¼ to start. Also turn up the volume on the source device (the device you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select "Tivoli Bluetooth (Not Paired)" when it appears on your device's screen to initiate search-
ing. Some devices may prompt you for a PIN. If so, enter "0000". "Tivoli Bluetooth" will change
from "Not Paired" to "Connected".
4. You will hear a ring tone from the Music System Two+ confirming connection and you can
begin playing your music files wirelessly. Adjust the volume level on your device. You should
not have to pair your device again. Depending on your device, you may need to make
multiple attempts at Pairing and/or Connecting to the Music System Two+, but please
give your device adequate time to Pair or Connect before repeating the process.
Pairing A Bluetooth Wireless Technology Enabled
iPhone/iPod touch/iPad
1. Press the Music System Two+'s front panel power button followed by the Bluetooth button,
or change the source to Bluetooth. This will power on the Bluetooth. Turn the volume up about
¼ to start. Also turn up the volume on the source device (the device you are streaming from).
2. Select "Settings". (Depending on software version)
3. Select "General".
4. Select "Bluetooth".
5. Switch Bluetooth "On" to initiate searching.
6. Select "Tivoli Bluetooth (Not Paired)" when it appears on the display. If you are prompted to
enter a PIN, enter "0000". "Tivoli Bluetooth will change from "Not Paired" to "Connected".
7. You will hear a ring tone from the Music System Two+ and you can begin playing your music files
wirelessly. Adjust the volume level on your device. You should not have to pair your iPhone/iPod/
iPad again.
The volume output level of music files varies. If you prefer an even higher output level, check the settings
in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off, and the Volume limit Off.
If you encounter a problem Pairing, press the small arrow to the right of "Tivoli Bluetooth" on your
iPhone/iPod touch/iPad display and select "Forget this Device", then repeat the Pairing process.
Depending on your device, you may need to make multiple attempts at Pairing and/or Connect-
ing to the Music System Two+, but please give your device adequate time to Pair or Connect
before repeating the process.
When streaming music, you can press the blue arrow to the right of the next track button >>| on the
iPhone/iPod touch/iPad display to alternate between the iPhone/iPod/iPad and Bluetooth.
:
note
• The Music System Two+ will remember pairing information for up to 8 devices. Additional devices
can be paired, but the least-recently used device will be replaced by the newly paired device.
12 – ENGLISH
All manuals and user guides at all-guides.com