Tivoli Audio Music System Two+ Mode D'emploi page 11

1. AUTO SCAN: Searches the entire frequency range. If you move the Music System Two+ to
another location, you must perform a new scan so the radio will find stations in the new
location.
2. DRC: Dynamic Range Control allows you to change the sound level of stations to make quiet
passages louder to compensate for a noisy environment, or when listening at a low volume level.
3. AUTO UPDATE: Choose between "Any", "DAB" (also DMB) or "RDS". For any of the auto
updates to work, you must have consistent reception of DAB or FM RDS with a time/date signal
provided. It could take up to a minute or more for the clock to update. Tivoli Audio is not
responsible for inaccurate time/date information provided by the auto update signal. To set
the clock manually select "Off" and set the time and date using the "Clock" button.
4. BACKLIGHT: Rotate the tuning knob and press in to select, or press the pq buttons on the
remote to adjust the display's backlight as desired.
5. FACTORY RESET: Press Select and use the remote pq and Select buttons to confirm (Yes)
or reject (No) the factory reset. A factory reset will restore factory defaults and cancel all your
personal settings, such as presets.
DAB Display Messages
Secondary Services: Secondary stations will be indicated by a >> symbol next to the station name.
Secondary services may not be available in your area.
?
" ": If this symbol appears next to the station name, it means the station is invalid or inactive.
"Not Available": Shown when tuning a DAB station with an insufficient signal.
FM Menu
In FM mode, press and hold the volume knob on the Music System Two+, or press and hold the
Menu button on the remote control, to enter the main menu. Rotate the knob and press in to change
the items within the menu, or use the remote's pq buttons and Select button.
1. SCAN SETTING: Press the Select button and use the +/- and Select buttons to choose
between "Strong Stations only" or "All Stations" when performing an auto scan, or select "Off".
Selecting "All stations" increases the sensitivity of the scan, possibly resulting in the auto scan
stopping on noise. Selecting "Off" allows manual tuning of all stations using the Tune
+/- buttons.
2. RDS: Select On or Off to turn RDS on or off.
3. FM TUNING STEP: Select 50 or 100 kHz tuning step. 100 kHz is recommended.
4. AUTO UPDATE: Choose between "Any", "DAB" (also DMB) or "RDS". For any of the auto
updates to work, you must have consistent reception of DAB or FM RDS with a time/date signal
provided. It could take up to a minute or more for the clock to update. Tivoli Audio is not
responsible for inaccurate time/date information provided by the auto update signal. To set
the clock manually select "Off" and set the time and date using the "Clock" button.
5. BACKLIGHT: Rotate the tuning knob and press in to select, or press the pq buttons on the
remote to adjust the display's backlight as desired.
6. FACTORY RESET: Press Select and use the remote pq and Select buttons to confirm (Yes)
or reject (No) the factory reset. A factory reset will restore factory defaults and cancel all your
personal settings, such as presets.
All manuals and user guides at all-guides.com
11 – ENGLISH