Cisco Linksys Compact Wireless-G WRT54GC Mode D'emploi page 19

Compact Wireless-G Broadband Router
Chapter 5: Configuring the Compact Wireless-G
Broadband Router
Overview
Linksys recommends using the Setup Wizard on the Setup CD-ROM for first-time installation of the Router. For
advanced users, you may follow the instructions in the previous chapter, "Chapter 4: Connecting the Compact
Wireless-G Broadband Router", and then configure the Router through its Web-based Utility.
This chapter will describe each web page in the Utility and each page's key functions. The utility can be accessed
via your web browser through use of a computer connected to the Router. For a basic network setup, most users
will use these two screens of the Utility:
• Basic Setup. On the Basic Setup screen, enter the settings provided by your ISP.
• Management. Click the Administration tab and then the Management tab. The Router's default password is
admin. To secure the Router, change the Password from its default.
There are seven main tabs: Setup, Wireless, Security, Access Restrictions, Applications & Gaming, Administration,
and Status. Additional tabs will be available after you click one of the main tabs.
Make the necessary changes through the Web-based Utility. On each screen, click the Save Settings button to
apply your changes or Cancel Changes to cancel your changes. Help information is shown on the right-hand side
of the screen.
Chapter 5: Configuring the Compact Wireless-G Broadband Router
Overview
All manuals and user guides at all-guides.com
NOTE: For first-time installation of the Router,
Linksys recommends using the Setup Wizard on
the Setup CD-ROM.
HAVE YOU: Enabled TCP/IP on your PCs? PCs
communicate over the network with this protocol.
Refer to "Appendix D: Windows Help" for more
information on TCP/IP.
13