Cisco Linksys Compact Wireless-G WRT54GC Mode D'emploi page 13

Compact Wireless-G Broadband Router
The Front Panel
The Router's LEDs, which indicate the status of the Router and network activities, are located on the front panel.
Figure 3-2: The Router's Front Panel
ETHERNET 1-4 Green. These numbered LEDs, corresponding with the numbered ports on the Router's back
panel, serve two purposes. If the LED is continuously lit, the Router is connected to a device
through that port. A flashing LED indicates network activity over that port.
WIRELESS Green. The WIRELESS LED flashes when there is a successful wireless connection.
INTERNET Green. The INTERNET LED lights up when there is a connection through the Internet port.
POWER Green. The POWER LED lights up and will stay on while the Router is powered on. When the
Router goes through its self-diagnostic mode during every boot-up, this LED will flash. When
the diagnostic is complete, the LED will be solidly lit.
Chapter 3: Getting to Know the Compact Wireless-G Broadband Router
The Front Panel
All manuals and user guides at all-guides.com
7