2.4
Qualification of personnel
Only appropriately trained persons who are familiar with and understand the contents
of these operating instructions and all other pertinent product documentation are
authorized to work on and with this product.
These persons must have sufficient technical training, knowledge and experience and
be able to foresee and detect potential hazards that may be caused by using the prod-
uct.
All persons working on and with the product must be fully familiar with all directives,
standards and safety regulations that must be observed for performing such work.
2.5
Personal protective equipment
Always wear the required personal protective equipment. When performing work on
and with the product, take into account that hazards may be present at the installation
site which do not directly result from the product itself.
2.6
Modifications to the product
Only perform work on and with the product which is explicitly described in these oper-
ating instructions. Do not make any modifications to the product which are not
described in these operating instructions.
Information on safety
RoCon UFH
EN
5