PR electronics 9203 Mode D'emploi page 48

All manuals and user guides at all-guides.com
If no key is activated for 1 minute, the display will return to the default state 1.0
without saving configuration changes.
1 Increase value / choose next parameter
2 Decrease value / choose previous parameter
3 Accept the chosen value and proceed to the next menu
Hold 3 Back to previous menu / return to menu 1.0 without saving
Power up
Directly to [EN.SIL]
if SIL-lock is enabled
0000
9999
1 2
3
™› 0000
— ON PASSW.
˜ OFF Txt 1
1.1
1.0
1.0 = Default state
Line 1 shows status for channel 1
and channel 2.
Line 2 shows output status for
channel 1, output current or tag no.
Line 3 shows output status for
channel 2, output current or tag no.
Line 4 indicates whether the device
is SIL-locked.
1.1 = Only if password-protected.
1.2 = If password has been set.
Line 1 symbols:
= OK. Flashing
™
Line 2 and 3 symbols:
— ON = channel 1 ON
˜ OFF = channel 2 OFF.
Line 4 symbols:
Static dot = SIL-locked.
Flashing dot = Not SIL-locked.
= output is active.
38
RoUting DiagRam
NO DIR
YES INV
1 2 1 2
3 3
NO DIR
ADV.SET CH1.FUN
Txt 2 Txt 7
3
YES
ADV.SET
Txt 2
= error.
œ
9203 - Product Version 9203-001
DIR
INV
1 2
3 3
DIR
CH2.FUN
Txt 7
To default state 1.0
Red text signifies safety
parameters in a SIL configuration.
See safety manual for details