PR electronics 9203 Mode D'emploi page 46

All manuals and user guides at all-guides.com
Signal error indications without display front
State
Device OK
No supply
Device defective
Ch. 1, output ON
Ch. 1, output OFF
Ch. 2, output ON
Ch. 2, output OFF
oPERating thE FUnCtion KEyS
Documentation for routing diagram.
in general
When configuring the 9203, you will be guided through all parameters and you
can choose the settings which fit the application. For each menu there is a
scrolling help text which is automatically shown in line 3 on the display.
Configuration is carried out by use of the 3 function keys:
will increase the numerical value or choose the next parameter
1
will decrease the numerical value or choose the previous parameter
2
will accept the chosen value and proceed to the next menu
3
When configuration is completed, the display will return to the default state 1.0.
Pressing and holding
state (1.0) without saving the changed values or parameters.
If no key is activated for 1 minute, the display will return to the default state
(1.0) without saving the changed values or parameters.
36
LED and error signal indications
Ch 1:
green lED
yellow / Red
Flashing
OFF OFF
OFF Red
Flashing Yellow
Flashing OFF
Flashing
Flashing
ConFigURation /
will return to the previous menu or return to the default
3
9203 - Product Version 9203-001
Ch 2: Status relay,
yellow / Red n.C.
Energised
OFF De-energised
Red De-energised
Energised
Energised
Yellow Energised
OFF Energised
Power rail
signal status
OFF
ON
ON
OFF
OFF
OFF
OFF