PR electronics 9203 Mode D'emploi page 123

Safety Manual
All manuals and user guides at all-guides.com
13. documentation for routing diagram
The routing diagram is shown in section 16.2.
13.1 in general
When configuring the 9203, you will be guided through all parameters
and you can choose the settings which fit the application. For each
menu there is a scrolling help text which is automatically shown in line
3 on the display.
Configuration is carried out by use of the 3 function keys:
will increase the numerical value or choose the next parameter
1
will decrease the numerical value or choose the previous parameter
2
will accept the chosen value and proceed to the next menu
3
When configuration is completed, the display will return to the default
state 1.0.
Pressing and holding
default state (1.0) without saving the changed values or parameters.
If no key is activated for 1 minute, the display will return to the default
state (1.0) without saving the changed values or parameters.
13.2 further explanations
13.2.1 Password protection
13.4 advanced functions
The unit gives access to a number of advanced functions which can be
reached by answering "Yes" to the point "adv.set".
6
9203 Solenoid / Alarm Driver
will return to the previous menu or return to the
3
Access to the configuration can be blocked by assigning
a password. The password is saved in the device in order
to ensure a high degree of protection against unauthorised
modifications to the configuration. Default password 2008
allows access to all configuration menus.
Password protection is mandatory in SIL applications.
Version No. V3R0