cecotec Mambo 12090 Manuel D'instructions page 8

suitable for commercial or industrial use.
- Do not immerse the cord, plug, or any non-removable part
of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are
dry before handling the plug.
- Do not leave the appliance unattended.
- Always turn the appliance off and disconnect it from the
power supply before changing accessories, disassembling
or assembling the product or approaching cutting or moving
elements.
- Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced by the official Technical
Support Service of Cecotec in order to avoid any type of
danger.
- Do not remove the product's cover when boiling water or
during operation.
- Do not use any accessory that has not been recommended
by Cecotec, as they might cause injuries or damage.
- Check the main body, jar, steamer and other components
regularly for damage. If any damage is detected, do not use
the appliance.
- Make sure the blades are properly assembled, with the
sealing ring in place, before operating the device.
- When cooking with temperature setting, do not lock the
measuring cup.
- Place it in the unlocked position or remove it for a better
steam release.
- After cooking with temperature settings, wait at least 3
minutes until the appliance has completely cooled down
before opening it.
- If the product stops working unexpectedly, turn it off and
switch it off immediately from the power supply.