Télécharger Imprimer la page

cecotec Mambo 12090 Manuel D'instructions page 50

Masquer les pouces Voir aussi pour Mambo 12090:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
ENGLISH
-
Clean the food processor after each use.
-
Wash the butterfly whisk and the rest of the accessories with warm soapy water. Rinse
again and dry well.
-
Wipe the main body with a clean damp cloth. If food residue remains, dampen the cloth in
warm soapy water before wiping it. Never immerse the main body in water or other liquid.
-
In order to maintain the good performance of your appliance, check and clean the
removable bottom part of the jar after each use. Wipe it with a soft damp cloth and dry it
thoroughly before using it again.
-
If the appliance is not going to be used for a long time, unplug it from the power supply and
store it in a cool and safe place.
Jar pre-washing advice
For better results, you can do a previous rinse in the jars with the food processor. Both the
ceramic jar and stainless-steel jar can carry out this process. To do so, follow these steps:
-
Place the batterfly on the blades to rinse the stainless-steel jar and the MamboMix spoon
to rinse the ceramic jar.
-
Introduce 500 ml of water and 10ml of soap.
-
Close the cover and set speed 3, temperature 50 and a maximum time of 3 minutes.
-
Empty the jar, there may be some food leftovers, so finish washing the jar by hand (both
the ceramic and stainless-steel har) or introduce the stainless-steel jar in the dishwasher.
Warning
-
Do not immerse or expose to water the connectors located on the bottom part of the
ceramic jar.
-
The blades and the MamboMix spoon are dishwasher safe.
6. TROUBLESHOOTING
Warning
Description
code
E1 warning
Locking system
E2 warning
Incorrectly
positioned jar
50
Possible cause
The jar or the jar's cover are
not fixed properly.
The jar is not in its correct
position or connection of
the temperature sensor at
the jar base is damaged.
Solution
Re-assemble the jar and
jar cover, make sure all
the parts are assembled
properly and tightly and try
operating it again.
Re-assemble the jar and
make sure it is fixed properly.

Publicité

loading

Ce manuel est également adapté pour:

Mambo 12090 habana