Publicité
Les langues disponibles
Les langues disponibles
1.2
Programming carousel service technician
The screen now shows behind button G: 1.
TIP
− Options 1 – 5 (resp. §1.2.1 − §1.2.5) look and function the same.
− With (M) and (N) a choice can be made from options 1 – 9 (resp. §1.2.1 − §1.2.9).
1.2.1
Putting a customer−specific adjustment in memory
G
H
I
J
K
L
M
D Push button G
− digit 1 will blink and the reset symbol
D Push buttons (M) and (N) for 10 seconds.
− After this, the reset symbol
− digit 1 appears, indicating that the adjustment has been made.
1.2.2
Showing customer−specific adjustments
When option 1 has not been performed, this option will show the factory settings.
1.2.3
Back to the factory settings
1.2.4
Setting the descale counter(s) to 0
1.2.5
Setting the total counter(s) to 0
TIP
− The options 6 – 9 (resp. §1.2.6 − §1.2.9) have a different operation method. These can be
interrupted (before confirmed by ENTER ) by pushing the STOP button.
2
N
appears.
will disappear
(after service)
ECopyright Bravilor Bonamat B.V.
Publicité
