BRAVILOR BONAMAT B5 Instructions D'installation page 3

1. TECHNICAL INSTALLATION
1.1 PIN Codes
TIP
− In order to enter the programming unit of operator and principal user, you have to know following
codes:
1.1.1 Operator
D Push the stop key (K) and release it, thereafter push .
Now you can run through the programming unit with the arrow keys (M) or (N). If you wish you make
an adjustment, first push one of the selection buttons (G, H, I, J).
1.1.2 Principal user
D Continuously push the stop key (K) and the same time push the following keys .
1.1.3 Service technician
D Continuously push the stop key (K) and the same time push the following keys .
D Push upper push−button (G) for 30 seconds.
ECopyright Bravilor Bonamat B.V.
1