Güde GA 18 L 1200 W Mode D'emploi page 11

Maintenance and storing
Make sure all nuts, bolts and screws are properly tightened and
the appliance is in a safe operating state.
Assembly / first start-up
Take the appliance out of the package and fit the suction nozzle
(pos. 1) on the suction hose (pos.6) first
Insert the other end of the suction hose to the air intake (pos. 4)
Operation
Switching the engine on
Put the switch (pos. 7) to the "ON" position
Switching the engine off
Put the switch (pos. 7) to the "OFF" position
Filter cleaning
If necessary, clean the filter while the appliance is in operation
by pressing the cleaning button two to three times for app. 5
seconds (pic. 2)
Filter change
If you want to change or clean the filter insert, remove it by
screwing it out (pos. 8)
Inspections and maintenance
Have any repairs unconditionally executed by trained
professional staff.
Disconnect the plug before every alteration, adjustment or
maintenance of the appliance!
All manuals and user guides at all-guides.com
- 7 -
Safety instructions for inspections and maintenance
The appliance, especially the suction nozzle needs to be
cleaned after any use!
Maintenance, treatment, repairs, storing
General instructions
Follow especially the safety instructions
Regular maintenance is necessary for proper working of
your appliance.
Regular cleaning and maintenance of the suction nozzle must
especially be carried out to prevent damage and accidents in
general.
The following needs to be provided before maintenance:
- disconnect the plug,
- put the appliance to a stable position,
wait until the engine cools down.
Cleaning
Always keep the appliance clean and in working order!
Clean the engine with just a cloth. Avoid spraying with heavy
water stream.
GB