Publicité
The improper use could damage people, animals
and objects.
of damage due to improper use or use under
conditions other than those indicated on the name-
plate and in these instructions.
Follow the routine maintenance schedules
this will allows the device to work in the best
provided from CALPEDA PUMPS or from
an authorized distributor.
Don't remove or change the labels placed
on the device. Do not start the device in
case of defects or damaged parts.
Maintenance operations, requiring full or
All the power terminals and other terminals
must be inaccessible after installation is
completed.
4.2. Security devices
The device is formed of an outer shell which
prevents coming into contact with the internal
organs.
4.3. Residual risks
The device, for its design and designation (in
has no residual risks.
4.4. Safety icons and information
Please refer to all product manuals supplied in the
pack.
4.5. Individual protection devices
During installation, starting and maintenance it is
suggested to the authorized operators to consider
the use of individual protection devices suitable for
described activities.
Signal
individual protection device
HAND PROTECTION
(gloves for protection against chemical,
thermal and mechanical risks).
5.
TRANSPORT AND HANDLING
The product is packaged to preserve the contents.
The means for transporting the packaged device
must be adequate to the size and weight of the
chosen product.
5.1. Handling
mounted on a pallet base suitable for
handling with forklift equipment.
of specialist lifting equipment in order that it can be
Instructions techniques - Postes de relevage
(piping, guide bars, etc.) must be dismantled
breakage.
5.2. Site storage
It is advised that once the lifting station has
interference.
Respect the following storage conditions :
- Ambient temperature from -10°C up to +70°C
condensing.
6.
INSTALLATION
6.1. Ambient requirements and installation site
dimensions
The customer has to prepare the installation site in
order to guarantee the right installation and in order
etc...).
The place where the device will be installed must
6.2. Unpacking
transportation.
Package material, once removed, must be
6.3. Installation
The lifting station must be installed outdoors, in a
over 150kg are stored.
6.3.1. Foundation
The lifting station must be installed according to the
instructions § 10.
6.3.2. Wet ground
is recommended:
- For wet terrain, install a decompression well
60cm from the substation and 20cm lower than
the bottom of the substation.
bottom invert of the excavation communicating
with the decompression well.
- For land with a groundwater, install drainage and
a decompression well.
substations cannot and must not be installed in
the groundwater.
Rev. 2111
GB
Page 9 / 24
Publicité
