Publicité
7.5. Stop
In case of malfunctions, the unit must be
switched off.
The product has been designed for continuous
off the pumps and then switching off the cabinet.
8.
MAINTENANCE
technician.
or reparation executed with the electrical
people injuries.
maintenance operations that require part-removing,
read schemas and drawings.
It is suggest to register all maintenance operation
executed.
During
maintenance
attention in order to avoid the introduction of
small external parts, that could compromise
the direct use of hands. Use water-resistant,
anti-cut gloves to disassemble and clean the
booster set.
During maintenance operations external
personnel is not allowed.
Maintenance operations that are not described
For further technical information regarding the
use or the maintenance of the device, contact
CALPEDA PUMPS.
Instructions techniques - Postes de relevage
8.1. Routine maintenance and inspection
In general, a lifting station requires regular
It is suggested to make an inspections at least
1. Rinse with clean water from inside the station.
3. Check for corrosion or signs of corrosion of wear
6. Check the status and operation of the possible
8. Check all electrical cables and accessories to
keep
particular
8.2. Dismantling the system
9.
separation.
Observe the local regulations and dispose the
environment protection.
Subject to change.
operate.
probe.
and tear.
without excessive vibration.
DISMANTLING
European Directive
2012/19/EU (WEEE)
Rev. 2111
GB
Page 11 / 24
Publicité
