Dometic RMDT10.5T Instructions De Montage page 24

Installing the refrigerator-oven combination
4.7 Installing condensation drain
I
NOTE
• Condensation can form inside the refrigerator due to frequent door
opening, incorrectly stored food or food that is stored when it is too
warm.
• Condensation must be drained with a constant slope.
Install the condensation drain as follows:
Variant 1
➤ Run the condensation hose from the refrigerator through an opening in the floor
which goes outside under the vehicle.
Variant 2
➤ Attach the condensation hose directly to the fitting intended for it on the
ventilation grill (fig. c 4, page 10).
4.8 Install the roof vent
No. in
fig. g, page 11
1
2
➤ Seal the installation frame to make the connection waterproof (fig. h, page 11).
➤ Insert the installation frame and screw it down tightly (fig. i, page 11). Use all
the fixing holes for this.
➤ Insert the hood and screw it down tightly (fig. j, page 11).
4.9 Securing the refrigerator-oven combination
!
CAUTION!
Only screw through the receptacles provided, otherwise foamed com-
ponents, such as cables, can be damaged.
24
Description
Hood
Installation frame
RMDT10.5(X)T
EN