Dometic RMDT10.5T Instructions De Montage page 23

RMDT10.5(X)T
➤ Make one or more ventilation openings above the oven with a total cross-section
of at least 150 cm
➤ Fit a panel above the oven and a ventilation grille in the panel with
468 mm x 90 mm (fig. b 1, page 10).
✓ Fresh air enters through ventilation slots into the oven under the door, is heated
and escapes from the oven through ventilation slots in the top of the door
(fig. b, page 10).
I
NOTE
Check and clean the ventilation holes regularly.
4.6 Installing the ventilation grill
I
NOTE
Use exclusively original Dometic ventilation grills to ensure safe
operation.
No. in
fig. c, page 10
1
2
3
4
➤ Seal the installation frame to make the connection waterproof (fig. d, page 10).
➤ Insert the installation frame and screw it down tightly (fig. e, page 10). Use all
the fixing holes for this.
➤ Fit the ventilation grill (fig. f 1 – 2, page 11).
➤ Insert the slider and lock the ventilation grill with it (fig. f 3, page 11).
EN
2
.
Description
Slider
Ventilation grill
Installation frame
Fastening for condensation drain
Installing the refrigerator-oven combination
23