Optika Italy B-380 Serie Manuel D'instructions page 16

5. Insert the power supply jack in the socket placed in the rear
side of the frame. (Fig. 5)
8.2 Field Diaphragm (Optional)
1. Unscrew the lens at the base of the microscope. (Fig. 6)
• It may take a little bit of force to unscrew the lens.
2. Fully screw the field diaphragm (M-156).
3. System is ready for the use.
8.3 Polarizing set (optional)
1. Place the polarizer on the light exit
croscope. (Fig. 7)
2. Loosen the head fixing knob
the microscope frame. (Fig. 8)
at the base of the mi-
①
and remove the head from
②
Page 16
F ig. 5 F ig. 5
F ig. 6 F ig. 6
①
F ig. 7 F ig. 7
②
F ig. 8 F ig. 8