Optika Italy B-380 Serie Manuel D'instructions page 15

8. Assembling
8.1 Assembling the microscope
1. Insert the optical head above the stand and tight-
en the screw with the provided Allen wrench. (Fig. 1)
ALC models only
2. Connect the ALC cable to the socket on the back of the
frame. (Fig. 2)
3. Insert eyepieces into the empty tubes of the optical head.
(Fig. 3)
4. Screw each objective into the thread of the nosepiece,
clockwise with increasing magnification. (Fig. 4)
Page 15
F ig. 1 F ig. 1
F ig. 2 F ig. 2
F ig. 3 F ig. 3
F ig. 4 F ig. 4