Safety Guidelines For Screw Drivers; Extended Safety Guidelines; Safety Guidelines For The Cutting Attachment; Safety Guidelines For Battery Chargers - Parkside PAS 4 A1 Traduction Des Instructions D'origine

Safety guidelines for screw drivers

WARNING!
■ Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring or its own cord. If a screw comes into
contact with a live wire, this may make ex-
posed metal parts of the power tool live and
could give the operator an electric shock.

Extended safety guidelines

■ Do not use a damaged or modified battery.
Damaged or modified batteries may behave
unexpectedly and cause fires, explosions or
pose a risk of injury.
■ Do not expose a battery to fire or exces-
sively high temperatures. Fire or temperatures
in excess of 130°C (265°F) can cause an
explosion.
■ Follow all instructions regarding charging
and never charge the battery or the cordless
tool outside of the temperature range given in
the operating instructions. Incorrect charging
or charging outside of the permissible tempera-
ture range can destroy the battery and increase
the risk of fire.
Safety guidelines for the cutting
attachment
DANGER!
■ Keep your hands clear of the cutting area
and the cutting blade.
■ Before carrying out any work on the appli-
ance, ensure that the rotation direction switch
is in the middle. This prevents unintentional
switching on.
■ Do not cut unless the blade guard is fully
functional. Defective blade guards will not
protect you against unintentional contact with
the cutting blade.
■ Before each use, check whether the blade
guard is perfect condition and that the cutting
blade is firmly fitted.
■ 32 │ GB
DANGER!
■ Always use cutting blades of the correct size
and with an appropriate central fixing bore.

Safety guidelines for battery chargers

This appliance may be used by
■
children aged 8 years and above
and by persons with limited physi-
cal, sensory or mental capabilities
or lack of experience and know-
ledge, provided that they are un-
der supervision or have been told
how to use the appliance safely
and are aware of the potential
risks. Do not allow children to
use the appliance as a plaything.
Cleaning and user maintenance
tasks may not be carried out by
children unless they are super-
vised.
The charger is suitable for
indoor use only.
If the connecting cable needs to
■
be replaced, this must be carried
out by the manufacturer or an
official representative in order to
avoid safety hazards.
PAS 4 A1