Toro Z Master 4000 Serie Manuel De L'utilisateur page 47

4. Secure the cables with 2 bolts, 2 washers, and
2 locknuts (Figure
5. Slide the red terminal boot onto the positive (+)
battery terminal.
6. Secure the battery with the rubber strap
51).
51).
(Figure
Servicing the Fuses
The electrical system is protected by fuses. It requires
no maintenance; however, if a fuse blows check the
component and circuit for a malfunction or short.
The fuses are located on the right console next to the
seat (Figure 54).
1. To replace the fuses, pull out the fuse to remove
it.
2. Install a new fuse
1. Fuse cover
2. Fuse holder
45
(Figure 54).
Figure 54
3. Fuel-shutoff valve
g036858