Festo CPA ASI Serie Notice Simplifiee page 13

CPA...-ASI-...
3
Addressing the AS-i valve terminal type 12
3.1 Assign the AS-i slave address
We recommend the use of the Festo addresser ASI-PRG-ADR
part no. 18959 with adapter cable part no. 18960. Before con-
necting an AS-i slave to the bus, assign a non-reserved AS-i
address to each AS-i slave. Set the desired address with the
AS-i addresser. Permitted range 1...31.
Please note:
–
The factory setting of the terminal is address 00
–
ID/ IO code see type plate or technical specifications
–
It is not necessary to parametrize the AS-i slaves.
3.2 Examples: Output assignment of the valve coils
Terminal with 2 double valves
BUS
9804NH
2 1 4 3
24 VDC
Terminal with 4 single valves
1 2 3 4
13