Publicité
Les langues disponibles
Les langues disponibles
Reverting to the factory default settings
If the receiver does not operate properly, reset the receiver as
follows.
, ///
HOME
1
Press HOME.
The home menu is displayed on the TV screen.
Watch
Listen
Custom Preset
Sound E ects
Zone Controls
Setup
2
Press / repeatedly to select [Setup], and then press
3
Press / repeatedly to select [Resetting], and then press
4
Press / repeatedly to select [All Settings], and then press
.
5
Press / repeatedly to select [Start], and then press
To cancel resetting
Select [Cancel] in step 5.
If you cannot perform resetting using the home menu
1 Press and hold (power) on the receiver for more than 10
seconds.
The settings return to their initial status.
Notes
• It takes a few minutes for the memory to be cleared completely. Do not
turn the receiver off until "RESET" appears on the display panel.
• By resetting, the link with the wireless subwoofer and rear speakers (not
supplied) may be lost.
In this case, reconnect them by referring to their operating instructions.
.
.
.
29
EN
Publicité
