Festo DNCKE 40 Serie Notice D'utilisation page 34

DNCKE/KEC
6 Commissioning
WARNING
Unexpected movement of components.
Injury due to impacts or pinching.
• Protect positioning range from access (e.g. using
protective crates).
• Make sure that no foreign objects are present in
the positioning range.
Note
• Ensure that:
– Adjustment is only performed by qualified specialized personnel.
– The holding force corresponds to the specified values
(è 6.4 Clamping force test).
– The limit values are not exceeded (è 13 Technical data).
Note
Clamping without round material will destroy the internal clamping component.
• Make sure that the clamping unit KEC is always pressurised when the round material
is not inserted.
If the clamping unit KEC is exhausted without round material inserted, the high
spring force will deform the internal clamping component until it cannot function.
34
Fig. 12
Festo – DNCKE/KEC – 1606a English