Sportplus POWER GYM SP-TG-001 Mode D'emploi page 17

5. ASSEMBLY INSTRUCTIONS
Step 4: Assemble the barbells
19
19
41
10
41
• Fasten the barbells (10) to the padding attachment frame (8) using 2 hex screws (41),
2 washers (51) and 2 safety nuts (35).
• Attach the safety pins (19) to the barbells (10).
SP-TG-001-IM-INT-06.indb 33
58
58
51 35
51
35
10
19
19
2 X (51) d8
2 X (41) M8*80
4 X (19) Ø25*Ø4*87
2 X (58) Ø6*88*96
2 X (35) M8
32
5. ASSEMBLY INSTRUCTIONS
Step 5: Assemble the upper handle system
18
15
9
16
16
• Fasten the handle (9) to the roller support brackets (12) using two triangle knobs (30).
• Attach two pad rolls (18) to the handle (9).
• Attach the foam padding (15) to the handle (9).
• Wrap the protective leather around the foam padding and close the hook-and-loop
fastener.
Note:
The handle (9) can also be assembled to the lower main frame (1) using 2 thin safety
pins (58).
30
30
9
15
12
18
2 X (30)
M10*20
33
17/6/2016 5:41 PM