PEERLESS SGLS01 Installation Et Assemblage page 5

Loosely attach four 1/4-20 x 12 mm screws (L),
2
washers (O), and 1/4-20 nuts (N) to shelf
support (C).
L
Insert six button bumpers (K) into shelf support (C).
4
4-1
Place glass shelf (I) on shelf support.
I
K
C
Visit Peerless website at www.peerlessmounts.com
N
O
C
Slide shelf support (C) onto upright (H) so that 1/4-20
3
nuts (N) slide into slots of upright (H) as shown in
figure 3 and detail 1. Slide shelf support to desired
position, level, then tighten 1/4-20 x 12 mm
screws (L) using 4 mm allen wrench (R).
3-1
NOTE: Max of two shelves can be used
Max height of top shelf is 34" from base.
Max height of second shelf is 28" from base.
N
H
DETAIL 1
Insert three button bumpers (K) into bottom of shelf
5
clamp bracket (D).
5-1
Attach shelf clamp bracket (D) to shelf support (C)
using two 1/4-20 x 20 mm screws (M) and two
1/4-20 nuts (N).
C
5 of 33 ISSUED: 07-28-06 SHEET #: 202-9156-8 11-10-08
For customer care call 1-800-729-0307 or 708-865-8870
C
L
SLOT
H
D
K
N
fig. 3
M