Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Attaching Screen with VESA 100 Mounting Pattern
• If screws don't get three complete turns in the screen inserts or if screws bottom out and hook plate is still not tightly
secured, damage may occur to screen or product may fail.
10
Choose hole pattern as shown in figure 10. Attach
hook plate (B) to back of screen using four M4 x 12
mm screws. Tighten screws using a phillips screw-
driver.
fig 10
M4 X 12 MM SCREWS
Insert two 1/4-20 x 12 mm screws (L) into holes indicated below for desired screen orientation. Tighten all screws
12
using 4 mm allen wrench (R).
L
No Tilt
Visit Peerless website at www.peerlessmounts.com
WARNING
11
Attach hook plate (B) to screen mount bracket (A).
B
L
2° Backward Tilt
11 of 33
All other brand and product names are trademarks or registered trademarks of their respective owners.
B
L
5° Forward Tilt
ISSUED: 07-28-06 SHEET #: 202-9156-8 11-10-08
For customer care call 1-800-729-0307 or 708-865-8870
© 2007, Peerless Industries, Inc. All rights reserved.
A
Publicité
Table des Matières
