Sym LV30/25/12W1-EU Série Manuel D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

 Turn Signal Indicator
The left or right Indicator will be flashing according to the operated directions of turn signal light switch
when it is turned on.
 Fuel Display/ Low Fuel Indicator
The fuel display frame is a seven-segment from D1 to D7 LCD bars to indicate the amount of fuel in the
tank. The fuel tank indication displays correctly when key switch is turned to〝ON〞,and indication change
by steps in sequence. The LCD bars will disappear as the fuel level decreases. When the D1&E&
light, please refuel as soon as possible. D1 is on the fuel reserve (low) position, remind you to avoid
becoming stranded without fuel.
 ABS indicator
Normally the ABS (Anti-lock Brake System) indicator light goes on when the ignition switch is turned on
and goes off shortly after the scooter starts moving. If the ABS is normal, it stays off. If something is
wrong with the ABS, the indicator goes on and stays on. When the indicator light is on, it means the
ABS mechanism does not function. Although the ABS function fails, the conventional brake system will
still work normally.
 Side Stand warning Indicator
When the side stand pulls down, the warning indicator lights on, and the engine cannot be started, when
the side stand raises up, the indicator goes off and the engine can be started.
CAUTION :
 Please not to let the electrical meter be out of function, or damage the electrical meter.
 Do not wipe plastic components (such as the instrumental panel, the headlight, body covers) with
solvents (such as gasoline), because solvents will damage these components.
 Storage box Indicator:When the indicator lights on, it means the storage box is opened.
 Engine coolant temperature
indicates engine coolant temperature.
When turn the main switch to "ON", the LCD and the water temperature indicator keeps coming on.
Normally, the LCD indicator should be below the (H) position when the scooter is operating. If the LCD
indicator stays above (H) position, the water temperature indicator will light on. Please check the coolant
level of spare coolant tank and check cooling fan for proper operation.
CAUTION:
The indicator will stay above (H) position when engine is run under high temperature for a long period
of time. In this case, the only way to cool the engine is to stop the engine.
 EFi trouble warning Indicator
When turn the main switch to "ON", this warning indicator will come on and then go off after the engine is
running. It displays the condition of the EFi system is working correctly. If there is any problem on the EFi
system, the warning indicator will light on continuously all the time. Please contact with a SYM dealer to
check the self-diagnosis system or electrical connections.
 Engine oil check indicator
Engine oil check indicator is for showing engine oil inspection / replacement time. When the vehicle is
ridden for approximately 1,000 kilometer, engine oil indicator illuminates which means engine oil
inspection / replacement is needed. Press "S" (Oil Reset) button twice very quickly to reset engine oil
mileage. Engine oil indicator goes off when the "S" button is pressed and the engine oil mileage will be
recalculated from the current riding mileage. Engine oil level should be checked every 1,000 kilometer
and replaced every 5,000 kilometer.
"OIL CHANGE"
7
7. Use of each component
is

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cruisym300iLv30w1-euCruisym250iLv25w1-euCruisym125iLv12w1-eu

Table des Matières