Operation Of Ignition Switch - Sym LV30/25/12W1-EU Série Manuel D'utilisation

OPERATION OF IGNITION SWITCH

IGNITION SWITCH
ON Engine "Start" position
 Engine can be started in this position.
 Ignition switch key can not be removed.
OFF Engine "Stop" position
 Engine is shut off and can not be started in
this position .
 Ignition switch key can be removed.
Open "SEAT" position
 Turn ignition switch to "SEAT" position and the seat can be open.
 There are three positions you can use.
CAUTION:
 Never operate the ignition switch key when the scooter is running. To turn the ignition switch to
〝OFF〞 and "
accident. Therefore, the ignition switch can only be turned off after the scooter has been
completely stopped.
 If ignition switch remains in the〝ON〞position for a prolonged period after the engine has been
stopped, the battery's capacity will be reduced and this may affect the engine start ability.
 Lock the steering handle and remove the key before leaving the scooter. Do not leave the key in
the ignition switch when leaving the scooter.
" , will shut off the electrical system and that may result in a dangerous
IGNITION SWITCH KEY
"Steering handle lock" position
 Turn the steering handle to left and press
ignition switch key down and then lightly turn it
to left to the "
 The steering handle is locked in this position.
 Ignition switch key can be removed.
 When unlocking, simply turn the key from
" " to〝OFF〞.
9
7. Use of each component
" position.