Technical Data; Symbols; Functional Description; Use For Intended Purpose - Festool OF 2200 EB Guide D'utilisation

8
Health hazard by dust
Various dust created by power sand-
ing, sawing, grinding, drilling and other construc-
tion activities contains chemicals known (to the
State of California) to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products,
• Arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
To reduce your exposure to these chemi-
cals work in a well ventilated area and use
approved safety equipment, such as dust
masks that are specially designed to fi lter
out microscopic particles.
TO REDUCE THE RISK OF INJURY,
USER MUST READ INSTRUCTION MANUAL.

Technical data

Power
Voltage
No load speed
Quick height adjustment
Fine height adjustment
Router diameter, max.
Drive shaft connection of the spindle
Weight
Protection class

Symbols

V Volts
A Amperes
Hz Hertz
~ Alternating current
n No load speed
0
Class II Construction
rpm Revolutions or reciprocation per minute
Ø Diameter
Warning of general danger
Read the Operating Instructions/Notes!
15 A
~ 120 V, 60 Hz
10000 - 22000 rpm
3-1/8" (80 mm)
3/4" (20 mm)
3-1/2" (89 mm)
M 22x1
17.2 lbs (7.8 kg)
/ II
Wear a dust mask.
Wear protective goggles!
 Advice or tip

Functional description

The pictures for the functional description are on
a fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
1.1 Adjusting wheel for fi ne routing depth
adjustment
1.2 Dial ring for fi ne routing depth adjustment
1.3 Rotary knob for fi xing routing depth
1.4 Scale for routing depth
1.5 Depth stop with indicator
1.6 Clamp lever for depth stop
1.7 Eccenter for connecting depth stop and
stepped stop
1.8 Stepped stop
1.9 Lever for changing base runner
1.10 Rocker switch for spindle lock
1.11 Adjusting wheel for speed control
2.1 Locking knob for on/off switch
2.2 On/off switch
2.3 Lever for locking protective guard
2.4 Handles
2.5 Extractor connector

Use for intended purpose

The routers are designed for routing wood, plastics
and similar materials. Aluminium and plasterboard
can also be processed with corresponding cutters
such as are listed in the Festool catalogues.
Festool electric power tools should
only be installed in work benches specially de-
signed by Festool. The electric power tool may
become unsafe and cause serious accident if in-
stalled in benches from other manufacturers or
self-manufactured work benches.
The user is liable for damages and
injuries due to incorrect usage.