Intended Use; Technical Data; Items Included - Festool MFK 700 EQ Notice D'utilisation D'origine

English
Do not allow hands to reach into the cut­
–
ting area and come into contact with the
cutter. Use your second hand to hold the
additional hand grip or the motor housing.
– Wear suitable protection: such as ear pro­
tection, safety goggles, a dust mask for
work which generates dust, and protective
gloves when working with raw materials
and when changing tools.
– Harmful/toxic dust may be produced dur­
ing your work (e.g. paint containing lead,
certain types of wood and metal). Inhaling
or coming into contact with this dust may
represent a hazard for operating personnel
or persons in the vicinity. Comply with the
safety regulations that apply in your coun­
try.
Wear a P2 dust mask to protect your
health.
– Only for AS/NZS: The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
2.3 Metal processing
When processing metal, the following
measures must be taken for safety reasons:
– Install an upstream residual-current circuit
breaker (FIG, PRCD).
– Connect the machine to a suitable dust ex­
tractor.
– Regularly remove dust deposits from the
motor housing of the machine by blowing.
Wear protective goggles.
2.4 Emission levels
Levels determined in accordance with EN 60745
are typically:
Sound pressure level
Noise level
Measuring uncertainty allow­
ance
CAUTION
Operating noise
Damage to hearing
► Use ear protection!
14
Vibration emission value a
three directions) and uncertainty K measured in
accordance with EN 60745:
Vibration emission level (3 di­
rections)
The specified emission values (vibration, noise)
–
–
–
Increase possible for other applications, with
other insertion tools or if not maintained ade­
quately. Take note of idling and downtimes of
machine!
3
The power tool is designed for routing wood,
plastic and similar materials.
4
Modular router
Power
Rotational speed (no
load) n
Tool holder
Max. routing tool diameter
Dust extractor connection
diameter
Weight (excluding cable)
Safety class
5
L = 78 dB(A)
PA
[1-1] MFK 700 with large surface router ta­
L = 89 dB(A)
WA
K = 3 dB
[1-2] Side stop with guide rods and fine ad­
[1-3] Extraction hood for large surface rout­
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
loads during operation.
They represent the primary applications of
the power tool.

Intended use

The user is liable for improper or non-in­
tended use.

Technical data

0
(optional : 6 mm, 1/4'')

Items included

ble
juster
er table with extractor connector
(vector sum for
h
a = 3,0 m/s
2
h
K = 2,0 m/s
2
MFK 700 EQ
720 W
10000-26000 min
-1
8 mm
26 mm/ 1''
27 mm
1,9 kg
/II