Technical Data; Symbols; Functional Description; Use For Intended Purpose - Festool OF 1400 EQ Guide D'utilisation

Health hazard by dust
Various dust created by power sand-
ing, sawing, grinding, drilling and other construc-
tion activities contains chemicals known (to the
State of California) to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
•
Lead from lead-based paints,
•
Crystalline silica from bricks and cement and
other masonry products,
•
Arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
To reduce your exposure to these chemi-
cals work in a well ventilated area and use
approved safety equipment, such as dust
masks that are specially designed to fi lter
out microscopic particles.
TO REDUCE THE RISK OF INJURY,
USER MUST READ INSTRUCTION MANUAL.

Technical data

Power
Voltage
No load speed
Quick height adjustment
Fine height adjustment
Router diameter, max.
Drive shaft connection of the spindle
Weight
Protection class

Symbols

Warning of general danger!
Risk of electric shock!
Read the Instructions!
Wear protective goggles!
V Volts
A Amperes
Hz Hertz
12 A
~ 120 V, 60 Hz
10000 - 22500 min -1
70 mm (2.76")
8 mm (0.31")
63 mm
M 22x1
4.5 kg (9.9 lbs)
/ II
~ Alternating current
n No load speed
0
Class II Construction
min -1
rpm Revolutions or reciprocation per minute
Ø Diameter

Functional description

The pictures for the functional description are on
a fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
1.1 Speed controller
1.2 Locking button
1.3 On/Off switch
1.4 Scale
1.5 Spindle stop
1.6 Pivoted turret stop
1.7 Collet nut

Use for intended purpose

The routers are designed for routing wood, plastics
and similar materials. Aluminium and plasterboard
can also be processed with corresponding cutters
such as are listed in the Festool catalogues.
Festool electric power tools should
only be installed in work benches specially de-
signed by Festool. The electric power tool may
become unsafe and cause serious accident if in-
stalled in benches from other manufacturers or
self-manufactured work benches.
The user is liable for damages and
injuries due to incorrect usage.

Electrical connection

The network voltage must conform to the voltage
indicated on the rating plate. A 16 A safety fuse (for
120 V) or a corresponding protective circuit-breaker
is required.
See the following fi gure for connection and discon-
nection of the power cable.
Always switch the machine off before
connecting or disconnecting the power cable!
8