Joie i-Juva Manuel D'instructions page 4

Product Information
Infant carrier module can be used separately
1. This is Universal Belted Enhanced Child Restraint System. It is
approved according to ECE R129 Regulation, for use primarily in
"Universal seating positions" as indicated by vehicle manufacturers
in the vehicle user's manual.
2. If in doubt, consult either the Enhanced Child Restraint System
manufacturer or the retailer.
Infant carrier module is compatible with base
1. This is Specific vehicle Belted Enhanced Child Restraint System.
2. If in doubt, consult either the Enhanced Child Restraint System
manufacturer or the retailer. (Please refer to vehicle fitting
information in fitting list)
i-Juva infant carrier module is compatible with I-Base 2, I-Base lx 2,
I-Base Advance, I-Base Encore, ClickFit™ R129.
Materials
Plastics, metal, fabrics
Patent No. Patents pending
5
Concerns on Installation
see images -
1 3
!
DO NOT install this infant carrier module on vehicle seats with lap
belts.
1
!
This infant carrier module is suitable for vehicle seats with a 3-point
retractor safety belt only.
2
!
DO NOT install this enhanced child restraint on vehicle seats that
face sideways or rearward with respect to the moving direction of
-1
the vehicle.
3
!
DO NOT place rear-facing enhanced child restraint on front seat
-2
with air bag , because death or serious injury may occur.
3
Please reference vehicle owner's manual for more information.
!
It is recommended to install this enhanced child restraint on the rear
-3
vehicle seat.
3
1
3
1
1 1
2 3 4 2 3 4
5 6 7 5 6 7
2
2 3
6