Publicité
Les langues disponibles
Les langues disponibles
2.
Press "Timer" button. By pressing the button several times, you can increase the pre-set
time in steps of 30 minutes, from 30 minutes up to a max. of 24 hours. The pre-set time is 8
hours. The program is then completed after 8 hours.
3.
Select the program. For safety reasons, the "Soaked Soy" and "Juice" programs are not
included.
4.
Fill in the ingredients and press "Start/Stop".
5.
You can stop the program and delay the time by pressing the "Start/Stop" button again
during the first minute. Now you can make a new selection.
Warning: If the room temperature exceeds 30°C, do not set the timer at over 12 hours to
prevent germs.
Cleaning and care
Cleaning
The device come with one automatic and two manual
self-cleaning modes. This makes cleaning a breeze.
1. After every program, Mila automatically switches on
the self-cleaning mode. The cleaning takes 7 minutes.
The device only needs water to clean herself. After the
end of the self-cleaning process, open the lid to allow
the mixing chamber to dry.
2. You can also directly select the cleaning mode via
the display, for example after not using the device for a
longer period of time, after preparing a sweet drink (with
sugar, syrup, or fruit), or whether the appliance is due for
a basic cleaning:
-
Select the cleaning mode and press "Start" to start
the cleaning mode. It takes 3 minutes. After the end of
the self-cleaning process, open the lid to allow the
mixing chamber to dry.
Publicité
