Publicité
Les langues disponibles
Les langues disponibles
Replacement
If the blades get blunt after a period use, you can replace them yourself. Only use original
spare parts!
Attention! Exercise particular care when handling the blades, also if they are dull. There is a
risk of injury!!!
1.
Ensure that it is not connected to the power supply
2.
Use the rugged tools such as a long screwdriver. Protect the base of the mixing
chamber, e.g. by placing several layers of paper or a fitting piece of silicone underneath the
blades, to prevent scratching the coating.
3.
Position one tool on the back side of the blade and slightly tilt it with the blade exerting a
bit of resistance.
4.
Use the other tool to strike against the tilted tool above the mixing chamber to loosen the
blade.
5.
After loosening the blade, carefully remove it by turning it and insert the new blade.
6.
Carefully tighten the new blade by hand. Start a manual cleaning program using the
"Cleaning" button. The blade fastens itself during the first uses.
Trouble shooting
The device indicated problems using a signal beep and via the display.
1. There is no glass har
2. The water container is empty
3. The lid is open or not properly closed
4. The collection container must be emptied
Publicité
