oNE-STaGE CookING
For simple one-stage cooking, you only need to set a cooking time. The
power level is automatically set to High. If you want to set the power to any
other level, you must set it using the power Level button.
1. Use the Number buttons to set a cooking time. You can set a time from
one second to 99 minutes, 99 seconds. To set a time over one minute,
enter the seconds too. for example, to set 20 minutes, enter 2, 0, 0,
0.
2. If you want to set the power level to something other than High, press
the power Level button, then use the Number buttons to enter a
power level.
Power levels
1 = PL:10
(Warm)
2 = PL:20
(Low)
3 = PL:30
(Defrost)
4 = PL:40
(Medium low)
5 = PL:50
(Medium)
3. Press the Start button to begin cooking. If you want to change the
power level, press pause/Cancel before you press Start, and re-enter
all of the instructions.
Some recipes require different stages of cooking at different
temperatures. You can set multiple stages of cooking with your
microwave.
MW6194ST_XSG_DE68-03249B-04_EN.indd 14
6 = PL:60
(Simmer)
7 = PL:70
(Medium high)
8 = PL:80
(Reheat)
9 = PL:90
(Sauté)
0 = PL:Hi
(High)
mULTI-STaGE CookING
1. Follow steps 1 and 2 in the "One-Stage Cooking" section on the
previous page.
When entering more than one cooking stage, the power Level button
must be pressed before the second cooking stage can be entered.
To set the power level at High for a stage of cooking, press the power
Level button twice.
2. Use the Number buttons to set a second cooking time.
3. Press the power Level button, then use the Number buttons to set the
power level of the second stage of cooking.
4. Press Start to begin cooking.
You can check the power Level while cooking is in progress by
pressing the power Level button.
DEmoNSTraTIoN moDE
You can use the Demonstration Mode to see how your microwave oven
operates without the oven heating.
1. Hold the 0 button and then press the 1 button.
To turn demo mode off, repeat step 1 above.
14
2015-02-14
3:40:54