R&G LP0176BK Instructions De Montage page 3

REMOVED (KEEP THE BOLTS AS THESE ARE REUSED TO MOUNT NEW
LICENCE PLATE ADAPTOR PLATE).

INSERT THE THREE LARGER RUBBER GROMMETS INTO THE LICENCE
PLATE ADAPTOR PLATE (SEE PICTURE 4), AN APLICATION OF WASHING UP
LIQUID AIDS THIS PROCESS.
Page | 3
PICTURE

MOUNT THE LICENCE PLATE ADAPTOR PLATE ONTO MOUNTING SPIGOTS
AS THE ORIGINAL WAS MOUNTED AND USING THE ORIGINAL BOLTS
SECURE IN POSITION (SEE PICTURE 3).

IF USING ORIGINAL INDICATORS (TURN SIGNALS), REMOVE FROM
ORIGINAL LICENCE PLATE BRACKET AND FIT TO NEW INDICATOR
MOUNTING PLATE AS ORIGINAL (YOU WILL HAVE TO STRIP BACK THE
WIRING LOOM TO SEPARATE WIRES FOR THE REMOVAL PROCESS).

FIT THE INDICATORS OF CHOICE(R&G MINI INDICATOR PRODUCT CODE
RG370 FOR BULB AND RG371 FOR LED TYPE OR RG372 FOR AERO STYLE
LED TYPE) TO THE INDICATOR MOUNTING PLATE AND SECURE USING
TWO OF THE M6x6mm LONG BUTTON HEADS TO MOUNT THE INDICATOR
MOUNTING PLATE AS SHOWN IN THE TOP PICTURE ON LEFT.

FIT NEW LICENCE PLATE LIGHT TO NEW LICENCE PLATE BRACKET (SEE
PICTURE 5). WE SUGGEST CUTTING AND SPLICING INTO ORIGINAL PLUG
SOCKET USING THE CONNECTORS FROM KIT. PROTECT WIRES USING HEAT
SHRINK FROM KIT.

PLEASE NOTE YOU WILL NEED TO GLUE THE LIGHT SHROUD TO THE
LED LICENCE PLATE LIGHT BEFORE FITTING, USING SUPER GLUE.

FEED THE LICENCE PLATE LIGHT WIRE THROUGH THE RECTANGULAR
HOLE IN THE NEW LICENCE PLATE BRACKET AND THEN THROUGH THE
OVAL HOLE (SEE PICTURE 5).

MOUNT THE NEW LICENCE PLATE BRACKET ONTO THE LICENCE PLATE
ADAPTOR PLATE USING THE FIVE M6x6mm LONG BUTTON HEAD BOLTS
AND SECURE (SEE PICTURE 3).

FEED ALL WIRES THROUGH THE IRREGULAR SHAPED HOLE IN THE
LICENCE PLATE ADAPTOR PLATE AND THROUGH THE BODY WORK INTO
THE UNDER-SEAT STORAGE SPACE (SEE PICTURE 6).
3
THE ORIGINAL GREEN WIRE ------NEW RED WIRE.
THE ORIGINAL BROWN WIRE (EARTH) ------NEW BLACK WIRE.
LP0176
4
PICTURE