Automatic Disc Checking Function - JVC MC-8100LU Manuel D'instructions

9-3. Automatic disc checking function

If a magazine was removed and reinstalled after the power has been turned on, this function will automatically check the disc
status inside the magazine.
Checking the operation modes.
Press and hold the MODE key for more than 5 seconds.
• The factory default setting for the automatic disc checking function is on.
Automatic disc checking function ON
A U T O D I S C
O N
Switching the operation modes
Operation modes will alternate (toggle) when you turn the power off, and then on while pressing both the SELECT key and
the LOAD/EJECT keys simultaneously.
sDepending on the management software used, you may still have to update the disc status data of the host computer
even after the automatic disc checking function has updated the disc status data of a magazine.
C H E C K :
Automatic disc checking function OFF
A U T O D I S C
O F F
Magazines
C H E C K :
E27