Display And Operation Sequence - JVC MC-8100LU Manuel D'instructions

Control Panel Operations and LCD Display

4-4. Display and operation sequence

The sequence of display and operation after turning the power on is as shown below.
Power On
POWER ON
INITIALIZING
Normal display
Pattern 1
SELECT SELECT
Pattern 2
1. TOTAL
SELECT
2. CR
SELECT SELECT
7. DR4
SELECT
* 1
8. FL
*1. When the MC-CF10U
Optional Carrier is installed.
PUSH SEL. KEY
SELECT
PUSH SEL. KEY
SELECT
Input the start
tray No.
ENTER
Input the end
tray No.
ENTER
Start accessing
• If the MODE, SELECT or ENTER key has not been pressed within 10 seconds, the current display will return to "Normal
display - Pattern 1" (except in a situation when an event is displayed or the Import/Export Tray numbers and SCSI-ID
numbers are being input).
E16
1. NORMAL DISPLAY
2. ERROR DISPLAY
MODE
3. ID No. DISPLAY
4. PANEL OPEN MODE
SELECT
5. DOOR OPEN MODE
6. ID No. SET MODE
ENTER
7. COUNT DISPLAY
ENTER
8. IMPORT/EXPORT
9. DRIVE DISPLAY
SELECT
ENTER
SELECT
ENTER
SELECT
ENTER
SELECT
ENTER
SELECT
ENTER
SELECT
SELECT
SELECT
ENTER
Error display 1
SELECT
Error display 2
SELECT SELECT
Error display 8
SCSI-ID display
PUSH SELECT
SELECT
PUSH SELECT
SELECT
EXECUTING ...
... CAN BE OPENED
PUSH SELECT
SELECT
PUSH SELECT
SELECT
ID No. display
SELECT
Input ID No.
ENTER
ID No. entry
DR1 :
SELECT
DR2 :
SELECT SELECT
DR4 :