Removing The Transport Protective Materials - JVC MC-8100LU Manuel D'instructions

3-2. Removing the transport protective materials

After opening the transport lock, proceed to the following steps without closing the door.
1.
Remove magazine No. 1.
( a See "9-1. Ejecting/loading the magazines" on page E25.)
2.
Pull out the protective material forwards.
Protective material
3.
Load magazine No. 1.
( a See "9-1. Ejecting/loading the magazines" on page E25.)
4.
Repeat the same operation for magazine No. 2.
• In the case of re-transporting, it is necessary to remove all the discs and re-attach the protective transport materials
using the reverse procedure to the above. When this operation is required, please consult your dealer or nearest JVC-
authorized service agent.
2
T O
P
T O
P
Setup
E11