NORMBAU Nylon Care 300 Instructions De Montage Et D'utilisation page 7

Montagehinweise / Mounting information / Consigne de montage / Montagetip
Max. loading permitted of listed products: 125kg
0447 xxx 4447 xxx
With max. length and max. loading permitted, the max. force per fastening is 3kN.
Maintenance
NORMBAU products are note maintenance-free! The products are to be tested
monthly by qualified specialists for proper function. In the event of defects (e.g.
insufficient braking force), the assembly instructions must be observed.
Care and cleaning instructions
Risk of injury
Improper cleaning can cause damage to the surface and lead to injuries.
Nylon products from NORMBAU have a smooth, high-gloss, easy-to-clean surface.
Dirty parts can be cleaned with a soft, damp cloth or sponge. If heavily soiled, we
recommend a commercially available detergent. Common disinfectants can be used
for wipe disinfection. Acidic cleaning agents, care agents, disinfectants and
decalcifying agents must always be used in accordance with the instructions for use.
An acid content of over 10% can attack the surface and negatively change the
brilliance and color. Use all agents only diluted, leave to act briefly and rinse off
sufficiently with water. Abrasive, strongly acidic and alcoholic cleaning and care
products should be avoided with Nylon.
Disposal
Disposal of the product and packaging is subject to the relevant national regulations
and must be disposed of in the prescribed manner.
2022-12-21 / 8214 136 / D
|
7 von 24 NORMBAU