NORMBAU Nylon Care 300 Instructions De Montage Et D'utilisation page 6

Montagehinweise / Mounting information / Consigne de montage / Montagetip
EN
Intended use
NORMBAU products are designed for use in wet rooms, at home, in care facilities
and hospitals. They provide grip and support and assist the independent standing
and sitting of persons with or without physical impairment.
Disclaimer of liability
NORMBAU assumes no liability for personal injury or property damage that arises
or has arisen as a result of improper assembly, use or cleaning, in particular in
disregard of the warning and safety instructions listed in these instructions.
According to the current regulation, the warranty is two years.
Under the intended conditions of use and in compliance with the guidelines for
maintenance and cleaning, the intended lifespan of the article is five years.
Warning notices
Risk of injury
If the max. loading permitted is exceeded, it can lead to permanent damage to the
product. In this case, the product must be tested before further use!
Risk of injury
When folding down the seat, ensure that there is no part of the body under the
product.
There is no toxic hazard from the material used by NORMBAU. Tested according to
DIN EN ISO 10993-5:2009. Product surfaces can become very hot when exposed
to external heat sources.
Safety instructions
Installation is to be carried out by a specialist and only with NORMBAU mounting
sets or suitable fastening material. Before installation, the wall structure must be
checked to determine the fastening material. Observe the information on the max.
loading permitted and the instructions for mounting! Following installation, the
instructions must be made available to the user.
In case of questions, mor information, uncertainties or if damage occurs, contact the
NORMBAU support service +49 (0) 7843 704 0 or visit us at www.normbau-
extranet.de.
Load
Max. loading permitted of listed products: 100kg
0300 xxx 0437 xxx
2022-12-21 / 8214 136 / D
4300 xxx 4437 xxx
|
6 von 24 NORMBAU