HTW ADMIRA Manuel De L'utilisateur Et D'installation page 65

Bottom mounting plate installation
Installation without skirting
The bottom mounting plate is xed directly to
the wall.
Drain-pipe
NOTE: In order to drain smoothly, the position of
the drain pipe must refer to the above gure
when discharging the right pipe.
Refrigerant pipe
Power cord
Installation with skirting line
Knock the bottom mounting plate straight with a
tool and x it on the skirting line.
Step 3: Taking the indoor unit apart to
connect the pipes
1. Open the bottom piping cover plate
Press and hold the bottom two buckles, and
then rotate to open the piping cover plate.
65
Knock straight
Two buckles