Intellibrite Controller Overview; Controls And Buttons - Pentair Intellibrite Guide D'installation Et D'utilisation

1
®
IntelliBrite
The IntelliBrite
Systems IntelliBrite underwater LED (light-emitting diode) lights, and IntelliBrite
LED landscape lights. It's easy to select a lighting feature, just dial in any
one of the pre-programmed color light shows or fixed colors. Using the Hold
and Recall buttons you can also create endless unique lighting effects. The
IntelliBrite Controller can control individual or multiple IntelliBrite LED lights.
Multiple IntelliBrite LED lights can be connected via a junction box to an
IntelliBrite Controller so that all lights can be switched on and off together.
IntelliBrite LED lights are fully compatible with Pentair IntelliTouch
EasyTouch
®
lights with IntelliTouch systems, refer to the IntelliTouch User's Guide (P/N
520102) and the EasyTouch User's Guide (P/N 520584).
The IntelliBrite controller is a 120 VAC device, DO NOT connect
12 VAC IntellilBrite pool/spa LED lights or IntelliBrite LED
landscape lights directly to the IntelliBrite controller, use an appropriate step
down transformer between the controller and lights. For more information see
page 5 - 9.

Controls and Buttons

The IntelliBrite Controller controls, buttons and LEDs are shown below:
Door
HOLD
button
and
LED
INTELLIBRITE CONTROLLER Installation and User's Guide
®
Controller Overview
Controller provides complete control of Pentair Aquatic
®
Control Systems. For more information about using IntelliBrite
IntelliBrite Controller
and
®
Power
ON/OFF Switch
RECALL button
and LED
Color show
Selections
Dial
(for selecting color
light shows and
fixed colors)