Selecting A Light Show Or Fixed Color; Hold And Recall Feature - Pentair Intellibrite Guide D'installation Et D'utilisation

Selecting a Light Show or Fixed Color

Note: When the IntelliBrite LED light(s) are powered on, a white light will
momentarily illuminate, followed by the selected color, unless the HOLD or
RECALL feature was previously enabled.
To select a color light show mode or fixed color mode, rotate the dial so that it
points to the desired selection.
The color mode selections are described below starting clockwise from the
9 o'clock position:
Light Show Mode
•
SAm Mode: Cycles through white, magenta, blue and green colors
(emulates the Pentair Water Pool and Spa SAm
•
Party Mode: Rapid color changing building energy and excitement.
•
Romance Mode: Slow color transitions creating a mesmerizing and
calming effect.
•
Caribbean Mode: Transitions between a variety of blues and greens.
•
American Mode: Patriotic red, white and blue transition.
•
California Sunset Mode: Dramatic transitions of orange, red and
magenta tones.
•
Royal Mode: Richer, deeper color tones.
Fixed Colors
•
Blue: Fixed color.
•
Green: Fixed color.
•
Red: Fixed color.
•
White: Fixed color.
•
Magenta: Fixed color.

Hold and Recall Feature

Note: When the IntelliBrite LED light(s) are powered on, a white light will
momentarily illuminate, followed by the selected color, unless the HOLD or
RECALL feature was previously enabled.
Hold button/LED: Press this button (LED on) to capture and save a color
effect while displaying one of the light show modes. When the button is
pressed, the LED will be on, indicating that the color effect is captured.
Recall Button/LED: Use this button (LED on) to activate the last saved
color effect. When the button is pressed, the LED will be on, indicating that
the color effect is being displayed.
INTELLIBRITE CONTROLLER Installation and User's Guide
®
light).
®
2