Mounting The Exhaust Air Pipe - Amann Girrbach ceramill argotherm 2 Mode D'emploi

▷ Screw the connection cables to the free con-
tacts of the heating rods (tightening torque
approx. 4 Nm).
Fig. 9 Making the electrical connection for the
heating rods
4 Nm
I N S T A L L A T I O N
5.4

Mounting the exhaust air pipe

▷ Insert the top insulating stone onto the furnace
ceiling in such a manner that both holes are
aligned.
▷ Carefully insert the exhaust air pipe into the
hole of the insulating stone.
The shoulder of the exhaust air pipe must be
flush with the surface of the insulating stone.
Fig. 10 Mounting the exhaust air pipe
E N
45