Ceramill Argovent; Intended Use - Amann Girrbach ceramill argotherm 2 Mode D'emploi

4.3

Ceramill Argovent

4.3.1 Delivery Scope
_ Sintering compartment Ceramill Argovent
(178710)
▪ Sintering base
▪ Sintering bowl
▪ Sintering cover
▪ Protective gas retort
_ Sintron sintering pearls
_ Argovent bowl/cover tongs
▷ After unpacking, check the machine for com-
pleteness and possible transport damages.
Please claim any transport damages immedi-
ately with your supplier.

4.3.2 Intended Use

Ceramill Argotherm is an enclosed sintering com-
partment for sintering milled CoCrMo units in a
protective-gas atmosphere.
This sintering compartment has been specially
developed for sintering Ceramill Sintron. Only the
Ceramill Sintron materials, whose properties and
sintering temperatures are known, may be used.
Any other or further-going use, such as the
processing of other products than those intended
for, as well as the handling of hazardous sub-
stances or materials hazardous to one's health,
does not apply as under the intended use.
M A C H I N E S P E C I F I C A T I O N S
4.3.3 Components and Interfaces
Fig. 5
1 Protective gas retort
2 Sintering cover
3 Sintering bowl
4 Sintering base
5 Gas tube with Teflon hose piece
The Teflon hose piece connects the gas
tube of the sintering base with the push-in
angle piece of the gas hose.
▷ Do not remove the Teflon hose piece
from the gas tube!
1
2
3
4
5
41
E N